NXP i.MX 8M Plus Reference Design
2-Channel MIPI CSI-2 Carrier Board With Toradex Verdin NXP® i.MX 8M Plus SoM
Image Processing Power for Your Embedded Applications
Designed for versatility, The Imaging Source's embedded vision platform for NXP supports single and dual-camera applications via our modular board concept and Toradex Verdin NXP i.MX 8M Plus SoM. The integration of our MIPI CSI-2, FPD-Link III(¹) and upcoming GMSL2(¹, ²) camera portfolio with robust industrial-grade computing enables precise application development, ensuring efficient turnaround of application-specific design changes that saves development time and related costs.
Our technical sales team is available to assist you with component selection. Please note: A maximum of two evaluation kits are available per customer.
Advantages
- Single-Source Solution: Complete reference design for prototyping and mass production
- Camera Resolutions: 0.4 MP - 20 MP
- Interfaces: MIPI CSI-2, FPD-Link III(¹), GMSL2(¹, ²)
- Sensors: Latest Sony and onsemi CMOS sensors
- Technological Partnership: Benefit from The Imaging Source's and Toradex's know-how and experience
- Multi-camera support for up to 2 cameras per system
- Optimized costs with lean hardware design
- Optimized performance with custom configurations
- Scalability via SoM-based design
- Changes to board design with short cycle times
- Efficient first-to-market strategy
- Tailor-made camera drivers and software
- Seamless integration with software frameworks like GStreamer, Open CV, libcamera and others
- MVTec HALCON support for best-in-class image processing
(1) FPD-Link III or GMSL2 cameras require an additional deserializer adapter board, which is available upon request. (2) Upcoming cameras
NXP i.MX 8M Plus Reference Design for Embedded Vision
- Specification
- Documentation
The reference design contains:
- Toradex Verdin i.MX 8M Plus SoM
- Carrier Board supporting up to 2 MIPI CSI-2, FPD-Link III(¹) or GMSL2(¹, ²) cameras
- DFM 36SX290-ML MIPI CSI-2 camera with Sony IMX290 sensor
- M12 lens: TBL 8 C
- Lens holder: TLH 10-M
- Cable: FFC 200mm/22 Pin
- Operating system with board support package
- Software: libcamera for rapid development and performance
(1) FPD-Link III or GMSL2 cameras require an additional deserializer adapter board, which is not included. (2) Upcoming cameras
Getting Started Guide
Click below to download the Getting Started Guide for the NXP i.MX8 Reference Design.
Technical Reference Manual
Click below to download the Technical Reference Manual for the NXP i.MX8 Reference Design.
Our technical sales team is available to assist you with component selection. Please note: A maximum of two evaluation kits are available per customer.
